AdBlock Detected

It looks like you're using an ad-blocker!

Our team work realy hard to produce quality content on this website and we noticed you have ad-blocking enabled.

Modem Meta Tool all version Free Download -2020

MODEM META TOOL:- In the post, we already published a post on “how to use the Maui Meta download tool to repair MTK IMEI number with and without database file?” But now the Maui Meta tool released it’s a new version [ Maui Meta Modem Meta tool ] with the new interface. Basically, now this Maui Meta Tool v10.1816.0.01 supports all older MTK and new MTK CPUs. So if you are using any latest MTK chipset based android smartphone then you have to use the latest version of SP mauimeta tool v10.1816.0.01.

Here on this page, we have managed to share the latest version of ModemMeta Tool along with the previous versions:

Modem Meta Tool

Features of ModemMeta Tool

Installer Application:

Modem Meta Tool comes as an installer application, which means you need to install it on your computer to use it. Download and extract the Modem Meta Tool on your computer and run the setup to install it.

Flash IMEI:

Modem Meta allows you to flash or repair IMEI on Mediatek smartphones, feature phones, and tablets. During the flashing or IMEI writing process, you may need to locate the database files that came along with the stock firmware of your Mediatek device.

Backup and Restore IMEI:

Modem Meta allows you to take a backup of your device IMEI which can be restored anytime. It supports backup and restores of IMEI on Mediatek Smartphone, Feature Phone, and Tablets.

Supports Mediatek Chipset:

Modem Meta only supports the devices running on Mediatek Chipset, whether its a Smartphone, Feature Phone, or tablet. It will not work on devices having chipset other than Mediatek.

How To Write IMEI On MTK Using Maui Meta v10.1816.0.01 Tool

This tool is only and only for MTK chipset CPU phones. So don’t try it on any other unsupported chipset like SPD and Qualcomm. Moreover, the latest Maui Meta Tool v10.1816.0.01 is a dual IMEI tool, so you are free to write dual IMEI or single IMEI at the same time.

Steps To Use Maui Meta Tool v10.1816.0.01

  • Download “MTK IMEI Tool MAUI Meta Tool Zip file”, “MTK drivers” and database file [optional] and extract them on pc.
  • Now install “MTK USB drivers” on pc to create a bridge connection in between pc and mobile. Skip the step, if already installed.
  • Enter into the “Maui Meta Tool v10.1816.0.01 tool” folder and run the “MauiMETA_v10.1816.0.01.exe” file as administrator.
  • Now configure the tool as shown in the below screenshot.

Set “Platform Type” as “SMARTPHONE

Set “COM PORT” AS USB COM

  • Next click on the “Connect” button to activate the tool. After that tool will show “Connection Stages” options on the right side of the tool.
  • Now come to the device and boot device into “Meta Mode”. Device must be boot into Meta Mode otherwise tool can’t flash IMEI on MTK mobile.

How To Boot MTK Phone Into Meta Mode

  • Switch Off mobile.
  • Press & hold Volume Up key + insert USB cable at the same time

The tool will load all the MTK Meat mode drivers one by one and the device will boot into meta Mode directly. If the device successfully booted into Meta Mode then you can see “meta mode” on your device screen.

Please Note: If you are unable to boot MTk into Meta mode by pressing volume key then try “Volume Down key” + Insert USB cable.

  • Once the device successfully connected with the tool, you will see “Connected” notification in the left bottom section.
  • In the next step, click on the “Search Tool” and select the “IMEI Download” option from the list.
  • After applying the above step, click on the “Load DB” option and load “Database File [ DB File ]” of your own device. If you already have a Database file [DB ] file, select the “FROM File” option and load “DB File”. Otherwise, select “Load From target” and the tool will load DB from the device.

TipsHere we recommend you select the “Load from target” option because the tool will load the correct DB file automatically. Otherwise, you can get a DB file for your device from Stock firmware of your device.

  • If you are using “load from target” it will take a couple of minutes to load the DB file. The database from the target or file will start.
  • Once done you will see the “DB successfully loaded” message under the software interface.
  • Now a new “IMEI Download” window will appear. Just type 15 Digit IMEI1 & IMEI 2 in both sections.
  • Finally, click on the “Write” button from the “IMEI Download” window and it will write IMEI within few seconds and you will get “Write IMEI to target successfully!”.
  • Remove and re-insert battery for once and reboot the device to apply modifications. Once the device boot up, dial *#06# to check IMEI number status.

Download Modem Meta Tool

ModemMeta is compatible with all versions of Windows OS, including Windows XP to Windows 10 (x32 or x64 bit). If in case you were looking for the latest version of the ModemMeta Tool, then use the following links to get it on your computer:

v10.1816.0.01: ModemMETA_v10.1816.0.01 (Link1, Link2, Link3)

v10.1816.1.00: ModemMETA_v10.1816.1.00 (Link1, Link2, Link3)

v10.1916.1.00: ModemMETA_v10.1916.1.00 (Link1, Link2, Link3)

v10.1920.0.00: ModemMETA_v10.1920.0.00 (Link1, Link2, Link3)

v10.1952.0.03: ModemMETA_v10.1952.0.03 – Latest (Link1, Link2, Link3)

3 thoughts on “Modem Meta Tool all version Free Download -2020”

  1. I downloaded latest version of mauimeta from you site but it needs password so what is the pin to extract.?

    Reply

Leave a Comment