SPD Factory Tool is an application that helps you to flash Stock firmware on any SPD (Spreadtrum) devices. Here, we have shared all the tested versions of the SPD Factory Tool, also including the latest for your convenience.
The Company officially released all the tools shared on this page, and all the files are available free to download which has been scanned by the antivirus program.
Features of spd factory Tool:
Simple Interference: The user interface of this amazing tool is so friendly that you can easily understand every task. Following are some great features of this tool:
Primary User Interface: You can quickly flash Stock firmware (PAC) on the SpreadTrum chipset device. Next, open the tool on your computer then click on the Load Packet gear icon and then browse your firmware file and load it here Once the firmware is loaded click on the Start downloading button. Now you will be able to see a progress bar that will run at the top of the tool window.
Remove Pattern Lock: Pattern lock or fingerprint lock usually comes with all Android smartphones that secure Android phones. Many times, we may have trouble opening a pattern lock, or we forget the password. At this time, this fantastic Tool helps us to remove the password.
PAC Firmware: Flash PAC firmware, also known as PAC file on SpreadTrum-chipset based devices, add this file in the SPD Factory tool and click on start downloading button for begin flashing procedure.
Format P5C Firmware: It is also used to flash the Stock Firmware on SPD devices. If you have any device on SPD chipset based, then you can quickly flash Stock firmware using this SPD factory tool
Download Factory Tool (Spreadtrum)
Help: In case you are facing any error while flashing your SPD (Spreadtrum) device, then you can ask us in the comment box we’ll help you.
Spreadtrum Driver: if you are going to flash the firmware on any Spreadtrum devices then, You must have to install the SpreadTrum Driver on your Computer.
How to use SPD Flash: If you are looking for Easy, step-by-step Guidelines to Flash Firmware on SPD (Spreadtrum) device then head over to the Flash SPD devices page.
SPD USB Drivers: If you are looking USB driver for your SPD (Spreadtrum) devices then head over to SPD USB drivers page. Where you will get the original drivers that are officially released by the company, and all kind of versions are available for your convenience.
Flash IMEI: After flashing your SPD device. You may need to flash IMEI using the WriteIMEI Tool or Read&write Tool, then follow step by step guidelines to flash IMEI.
Alternative: SPD Upgrade Tool and SPD Research Tool are the alternatives to SPD Factory Tool. These are officially built and Distribute by SpreadTrum communication Inc and come with the Same interface and features.
Compatibility: This tool works with all versions of Windows operating systems like Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, and Windows 10.
Credits: All the credit goes to SpreadTrum communication Inc because they created the SPD upgrade tool and thanks to him for Distributing such tolls with us.
How To Flash .pac File Using Factory Download Tool
If you have any SPD chipset based mobile and it’s firmware contain with .pac file then you can continue the process without any issue. Otherwise, use the “upgrade download tool” or “Research download tool” as an alternative tool of the Factory Download tool.
- Extract the downloaded “firmware” of your device. [ Open the folder and check .pac file. If it’s there then go for next step]
- Install “SPD SUB drivers” on pc. Drivers installation is a must to create bridge connection in between pc and mobile.
- Run “factory download tool” as administrator. [It’s a portable software, so no need to install it on pc]
- Once the tool opened, click on the “Gear” icon and load .pac file from the firmware folder.
- Now click on the “Play” button to start the flashing process.
- Come to the device and power off it properly.
- Press Boot key + insert USB cable at the same time.
What Is Boot Key: Boot key may be different for different devices. For this, Do Google and find the correct boot key of the device.
- If the device is properly connected with pc, you will see “SPRD DIAG PORT” under the “device manager” section.
- Once the tool detects the device properly, flashing will start automatically. Here it will take 5-10 minutes to flash complete firmware. Flashing time depends on the firmware file size.
- After flashing, you will see the “Previous Pass” message on the log window.
- Unplug the USB cable and reboot the device manually.
Flashing firmware will wipe all user data and phone data completely. At this time you have to set up your device as a new device
In this way, you can install stock ROM on any SPD mobile using the SPD Factorydownload tool. It’s really very easy. Just follow the instructions to flash firmware using the SPD factory download tool.
This is all about “how to use Factory Download tool to flash .pac file?” till now getting any issue in any step, leave your comment below.